home
***
CD-ROM
|
disk
|
FTP
|
other
***
search
/
Danny Amor's Online Library
/
Danny Amor's Online Library - Volume 1.iso
/
html
/
faqs
/
faq
/
hp-faq
< prev
next >
Wrap
Text File
|
1995-07-25
|
103KB
|
2,843 lines
Subject: comp.sys.hp.hpux FAQ
Newsgroups: comp.sys.hp.hpux,comp.sys.hp.misc,comp.sys.hp.hardware,news.answers,comp.answers
From: gcagle@dracula.mentorg.com (Greg Cagle)
Date: 10 Aug 1994 20:31:55 GMT
Archive-name: hp-faq
Last-modified: 1994/8/10
Version: 3.1
comp.sys.hp.hpux FAQ (Frequently Asked Questions)
Subject: 1. INTRODUCTION
This article contains the answers to Frequently Asked Questions (FAQ) seen in
the Internet newsgroup comp.sys.hp.hpux. Issues may also be discussed in
comp.sys.hp.apps, comp.sys.hp.misc, and comp.sys.hp.hardware. Discussion in
this document centers around Hewlett-Packard computer systems running the
HP-UX operating system; the focus tends to be on the series 700 workstations,
although topics are also applicable to series 800 machines, and to a lesser
degree, series 300 and 400 machines. It is posted twice monthly, on the
1st and the 15th of the month.
This article is Copyright 1994 by Greg Cagle. It may be freely redistributed
in its entirety provided that this copyright notice is not removed. It may
not be sold for profit or incorporated in commercial documents without the
written permission of the copyright holder. Permission is expressly granted
for this document to be made available for file transfer from installations
offering unrestricted anonymous file transfer on the Internet. This article is
provided as is without any express or implied warranty. The content of this
article is the sole responsibility of the author and contributors, and does
not necessarily represent their employers, Mentor Graphics, or Hewlett-Packard.
Refer to question 3.1 for details on where to get this FAQ.
This FAQ is written in "minimal digest format". You can skip from one
section to the next by pressing ^G in many newsreaders, such as rn, trn
and strn (but not nn).
Questions marked with a "+" are new to this issue, and questions with changes
since the last issue are marked by a "!".
Submissions, corrections, comments, input, complaints, attaboys, large amounts
of money, etc., should be directed to Greg Cagle <greg_cagle@mentorg.com>.
------------------------------
Subject: 2. TABLE OF CONTENTS
1. INTRODUCTION
2. TABLE OF CONTENTS
3. FINDING INFORMATION
3.1 Where can I get a copy of this FAQ file?
3.2 Courses on HP-UX
3.3 Interex, The International Association of HP Computer Users
3.4 InterWorks, The International HP Workstation Users Group
3.5 Interex HP Users Conferences 1994
3.6 InterWorks Conference 1994
3.7 HP/Works
3.8 HP/Works Conferences
3.9 Japanese HP Computer Users Association
3.10 German HP User Group
3.11 HP-UX publicly available software from InterWorks.
3.12! Anonymous FTP Sites for HP-UX, and UNIX related software.
3.13 Where can I get a demo CD with software for HP-UX?
3.14 HP-UX patch information
3.15 How can I send mail to an "hpdesk" address?
3.16 What are the known issues with porting BSD-based programs to HP-UX?
3.17 What periodicals are available that focus on HP-UX?
3.18 Books on HP-UX
3.19 HP-UX Sysadmin Mailing List
3.20! HP-related WWW Sites
3.21! Who is this George Carter and how do I get rid of his posts?
3.22+ HP 500 Mailing List
in the line.
4. THIRD PARTY VENDORS
4.1 Third party vendors for RAM.
4.2 Third party vendors for other things
5. UTILITIES
5.1 ASCII to Postscript converter.
5.2 How do I make perl on HP-UX?
5.3 What is the status of the various gnu items on HP-UX?
6. X WINDOW SYSTEM, MOTIF, AND HP-VUE
6.1 X11 libraries (Athena, etc.) and utilities (imake, etc.).
6.2 How can I display an image on the root window with HP-VUE?
6.3 How do I get a scroll bar on hpterms?
6.4 How can I put a title in my hpterm titlebar?
6.5 How come my hpterms keep going away by themselves?
6.6 How come my HP X/Motif clients take a LONG time to display on a Sun?
6.7 How can I get my login stuff to work under HP-VUE?
6.8 How can I get console messages to go to an hpterm?
6.9 What happened to the vuewm key accelerators at VUE 3.0?
6.10 How come I can no longer disable the caps lock key with xmodmap?
6.11 How come vi behaves strangely in xterms at 9.01?
6.12 How do I disable HP-VUE?
6.13 What's a good termcap entry for hpterm?
6.14 My screen is wedged. What should I do?
6.15 How can I get an X client to come up in an alternate workspace?
6.16 How can I get HP-VUE to not override colors?
6.17 How can I override the system default printer in vuepad?
6.18 What about X11R6?
6.19 How can I set user-specific app-defaults in HP-VUE?
7. OPERATING SYSTEM
7.1 Can I have filenames longer than 14 chars?
7.2 How can I tell what products have been loaded on my system?
7.3 How do I safely remove software from my system?
7.4 What's the scoop on HP-UX 9.03/9.04?
7.5 How come HP-UX doesn't support NFS root access?
7.6 How can I change the order of hostname resolution?
7.7 How come the LOGnnnn files in /usr/adm keep growing and growing?
7.8 How come I can't lock mail or other files on a Sun?
7.9 Why are mail files in /usr/mail are owned by daemon instead of the recipient?
7.10 How can I tell if I need more than a 2-user license?
7.11 How can I tell what patches are in the kernel?
7.12 How come I have to hit return after control-d in the Korn shell?
7.13 How do I boot into single user mode?
7.14 How come my Korn shell login hangs?
7.15 How can I avoid those annoying copyright notices on login?
7.16 How can I turn off quota checking?
7.17 What are the issues with HP-UX 9.01?
7.18 Why does chown behave differently at 9.x?
7.19 How can I track log files and core files?
7.20 How much memory can a process use?
7.21 How come there's little discussion of DCE?
7.22 How can I make a ramdisk?
7.23 How come I can't lock files across NFS after upgrading to 9.01?
7.24 What's a good strategy for clearing /tmp?
7.25 How can I change the timezone?
7.26 How can I look at what my system is doing?
7.27 How can I partition HP-UX disks on 700s?
7.28 How can I print man pages successfully?
7.29! How can I limit core files?
7.30 Can I put more than one backup on DDS with fbackup?
7.31 How can I load multiple patches on a machine at the same time?
7.32 How can I set up an HP-UX workstation as an X terminal?
7.33 What causes "Unable to initialize MI" when running Glance?
7.34 How come I can't get all of my swap space?
7.35 How come I can't start my Aserver?
7.36 How can I get a daemon to successfully start from /etc/rc?
7.37 How come my /dev/null keeps getting blown away?
7.38 How can I track network packets?
7.39 How come my processes keep dying at 67M memory usage?
7.40 Is it possible to artificially limit the memory size?
7.41+ How come my alt key combinations don't work in emacs X mode?
7.42+ I can't get Flex LM based licensing to work.
8. COMPILERS AND LINKERS
8.1 What's a P-FIXUP error?
8.2 Where is regcmp on HP-UX?
8.3 How come the default C compiler is brain-dead?
8.4 How do I deal with "too many defines"?
8.5 How come I get "_builtin_va_start" undefined when I build with gcc?
8.6 How can I tell if something was built debuggable?
8.7 Is there some kind of problem with using FLT_MIN in ANSI mode?
8.8 What's the deal with _INCLUDE_xxxx_SOURCE?
8.9 How come I need to explicitly specify -I/usr/include?
8.10 Is there an equivalent for getrusage()?
9. HARDWARE AND PERIPHERALS
9.1 Are alternate keyboards available for HP workstations?
9.2 How can I play audio CDs on an HP workstation?
9.3 How can I enable the LAN interface on a 700?
9.4 How can I get an Exabyte to work on an HP?
9.5 Is there a "node ID" on 700s?
9.6 How can I get a stuck DDS tape out of the drive?
9.7 How can I use dump with a DDS tape?
9.8 What is the correct major number for DDS drives on 9.x?
9.9 How can I set up /dev/audio to point to the external jack on a 700?
9.10 How can I configure the parallel port handshake on a 700?
9.11 What are the specs of the audio hardware on the 700 series?
9.12 What are the various revisions of PA-RISC?
9.13 How do I read an SGI-written tar format DDS tape?
9.14! Is there a trackball for the 700?
9.15 Where can I get disktab entries for third party disks?
9.16 Do I need to terminate the internal SCSI on a 700?
10. LOOKING FOR...
10.1 Where did xline go at 9.x?
10.2 How about the VUE 2.01 man page help index?
10.3 Is there anything remotely like the Apollo DM available?
10.4! Where can I get SLIP for HP-UX?
10.5 Where can I get pcnfsd on HP-UX?
10.6 Where can I get ppp for HP-UX?
10.7! Where can I get STREAMS for HP-UX?
10.8 What about POSIX threads?
10.9+ Where can I get Interviews for HP-UX?
10.10+ Where can I get POP for HP-UX?
10.11+ Where can I get sudo for HP-UX?
------------------------------
Subject: 3. FINDING INFORMATION
------------------------------
Subject: 3.1 Where can I get a copy of this FAQ file?
Many FAQs, including this one, are available via FTP on the Internet
FAQ archive site:
ftp://rtfm.mit.edu/pub/usenet/news.answers/hp-faq
This FAQ is also archived on the Interworks archive machine:
ftp://iworks.ecn.uiowa.edu/pub/comp.hp
HTML versions of this document are available at:
http://www.cis.ohio-state.edu/hypertext/faq/usenet/hp-faq/faq.html
http://www.csc.liv.ac.uk/FAQ/
http://support.mayfield.hp.com
You can FTP the html version from:
ftp://supportnet.mentorg.com/pub/mentortech/mgc_env/examples/HP-UX/faq.html.tar.Z
You can also get it by e-mail from mail-server@rtfm.mit.edu; send the
text "send usenet/news.answers/hp-faq".
The FAQ is also included with the InterWorks software CD-ROM, the Interex CSL,
and the Walnut Creek Internet CD-ROM. Note that these versions were current
when the respective distributions were frozen.
A Japanese version of this document is available from CUA (HP Computer
Users Association); send mail to <tagami@hpujuu01.yhp.hp.com>. The
translation was done by Masataka Isoya.
If all else fails, contact the maintainer (greg_cagle@mentorg.com).
------------------------------
Subject: 3.2 Courses on HP-UX
Call the following numbers for information or the latest HP Education Catalog.
U.S.: 1-800-HPCLASS {1-800-472-5277}
Canada: (416)678-9430
------------------------------
Subject: 3.3 Interex, The International Association of HP Computer Users
Interex is the International Association of HP Computer Users and the largest HP
user group in the world. The organization is more than 19 years old with
thousands of members worldwide. It represents HP users of all kinds including
HP9000, HP3000, HP1000, and Vectra PC's with annual conferences attracting
vendors from all over the world. Interex publishes "Interact" for the HP3000
and Vectra PC user, "hp-ux/usr" for the HP9000 user and a realtime operating
system newsletter for the HP1000 users.
There are many regional users groups, many holding annual or semiannual
conferences, and Interex has a collection of software (with sources) covering
MPE, HP-UX and RTE called the Contributed Software Library.
To contact Interex:
(800) INT-EREX or (800) 468-3739
or: (408) 747-0227
fax: (408) 747-0947
email: ehrhardt@interex.org .. editor of hp-ux/usr magazine
pubs@interex.org .. Circulation/advertising
membership@interex.org .. membership inquiries
cslhpux@interex.org .. contributed software library (hp-ux)
Compuserve: 76376,1222
Address: Interex Interex (for US mail)
1192 Borregas Avenue. P.O. Box 3439
Sunnyvale, CA 94088 Sunnyvale, CA 94088-3439
------------------------------
Subject: 3.4 InterWorks, The International HP Workstation Users Group
InterWorks, formerly the Apollo Domain User's Society (ADUS), was formed to
provide a users group specifically for HP _workstation_ users. The group
publishes a quarterly newsletter, "The Works", holds an annual conference (see
below), and maintains a library of HP-UX (and DOMAIN) software (see below).
Membership is free; please contact Carol Relph for more information:
Carol Relph
Manager, Member Services
InterWorks, Inc.
c/o Hewlett-Packard Company
Workstation Business Unit
300 Apollo Drive, Mailstop IWORKS
Chelmsford, MA 01824-3623
(508)256-6600
E-Mail: relph_c@apollo.hp.com
------------------------------
Subject: 3.5! Interex HP Users Conferences 1994
For more information, please contact the INTEREX Conference Department
at the above address. It's 9/18 - 9/22 in Denver.
------------------------------
Subject: 3.6 InterWorks Conference 1994
The next InterWorks conference is to be held 5/7/95 - 5/12/95 at The Pointe
in Phoenix, Arizona.
------------------------------
Subject: 3.7 HP/Works
HP/Works is basically the UK equivalent of InterWorks - catering for users
of HP workstations running both HP-UX and Domain/OS. Full membership
details are avaiable from:-
Helen Grainger,
PO Box 47,
Bicester,
United Kingdom +44 (0)869 321080
or by e-mail to J.G.Owen@bham.ac.uk
------------------------------
Subject: 3.8 HP/Works Conferences
September 1994 (date to be fixed) - SYS-ADMIN SIG workshop at Liverpool
University on "Accessing the Internet"
22nd and 23rd November 1994 - Autumn Conference at St.John's Swallow Hotel
Solihull on the theme of Today, Tomorrow, The Future
Details can be obtained from either Helen Grainger or by e-mail via
j.g.owen@bham.ac.uk.
------------------------------
Subject: 3.9 Japanese HP Computer Users Association
In Japan, the HP users group is called CUA (Computer Users Association);
for information, contact <tagami@hpujuu01.yhp.hp.com>.
------------------------------
Subject: 3.10 German HP User Group
In Germany, the HP user group is called "Deutsche HP-Benutzergruppe e.V.";
contact Mario Beckmann <beckmann@com1.dwhl.de> for information.
------------------------------
Subject: 3.11 HP-UX publicly available software from InterWorks.
Dave Shaw is the Interworks librarian. He maintains a library of publicly
available HP-UX related software on behalf of the InterWorks User Group. He can
be reached at (303)443-9413 or via e-mail at <librarian@iworks.ecn.uiowa.edu>.
The following text is provided by Dave. See the README mentioned below for
details.
There is an archive of UX-related software on the InterWorks library node
(iworks.ecn.uiowa.edu--128.255.18.10). Note that everything is available via
anonymous ftp in the pub/comp.hp directory
(ftp://iworks.ecn.uiowa.edu/pub/comp.hp). The README there contains a
complete list of the available software.
The third InterWorks software CD, which contains the library as it was in
mid-March 1994, plus many items selected from other internet sites (including
much of the software available via the Liverpool archive), is now available. A
list of the contents is on the iworks node in the pub/comp.hp directory as
README.CD. HP ships the InterWorks CD as part of their standard CD-media kit.
This version of our CD should begin shipping with that kit later this summer.
In the meantime, the CD is also available through InterWorks for $75.00 in the
U.S. and $85.00 outside. Send a check or money-order (payable at a U.S. bank)
made out to:
InterWorks
to:
Carol Relph
HP-InterWorks
300 Apollo Drive
Chelmsford, Ma. 01824
All of the archive is suitable for the 700 series machines, and I have started
to verify that. Executables are included in some packages. If you take a package
and find that you must build an executable (or do some porting) for your machine
and/or OS level, I would appreciate hearing about your work and receiving a copy
of the executable you built.
Note that I have had very little involvement in the writing or packaging of any
of the items on the list-- they are the result of the work of many other
people. In particular, note that the available binaries have not been compiled
by me. If you are concerned about running binaries compiled by someone else,
build them yourself with the available source. Also note that individual
authors may include text regarding the rights of others to use and distribute
their code.
Thanks to all the contributors.
------------------------------
Subject: 3.12! Anonymous FTP Sites for HP-UX, and UNIX related software.
Site: ftp://iworks.ecn.uiowa.edu/pub/comp.hp
Contents: The InterWorks HP-UX Library in the directory "pub/comp.hp" as
described above. The iworks node also keeps the last 4-6
months of comp.sys.hp.hpux online (via an InterWorks member logon
(see question 3.4 above). An archive going back to June 1990
is available-- contact the InterWorks librarian for details.
Additionally, a large (~1300 line) "HP-UX Troubleshooting
Guide" is available under the InterWorks member logon.
Name: ftp://ftp.csc.liv.ac.uk
Contents: 633 packages ported to HP-UX 8.07, 9.01 and 9.03
Here is an overview of ftp.csc.liv.ac.uk as of Wed 10 Aug 1994:
(The 2 most recently installed packages in each category are in brackets)
56 packages in /hpux9/X11R5/Graphics (xli-1.16 xpm-3.4c)
53 packages in /hpux9/Games (xtmines-1.2.1 xbattle-4.0)
51 packages in /hpux9/X11R5/Misc (xmotd-1.0 xless-1.7)
34 packages in /hpux9/Networking (glimpseHTTP-1.0 chimera-1.54)
30 packages in /hpux9/X11R5/Demos (xstones-1.0 xneko-2.00)
27 packages in /hpux9/Gnu (flex-2.4.7 readline-2.0)
25 packages in /hpux9/X11R5/Toolkits (auis_built-6.3 auis-6.3.part05)
25 packages in /hpux8/X11R4/Misc (xsky-2.01 xvertext-5.0)
22 packages in /hpux9/Sysadmin (dmon-1.6.6 md5-1.00)
20 packages in /hpux9/X11R5/Networking (llnlxftp-2.0.3 xforward-1.0)
20 packages in /hpux9/Misc (glimpse-1.0 obsfuscate93-1.0)
19 packages in /hpux9/Maths/Misc (ffts_in_C-1.0 eigen-1.01a)
18 packages in /hpux8/Networking (netperf-1.7.1 tftpd-1.0)
17 packages in /hpux9/X11R5/Core (imake-5.04 xdpyinfo-1.17)
15 packages in /hpux9/Text (man2html-1.0 bibview-2.1)
15 packages in /hpux8/X11R4/Demos (xball-3.0 xspringies-1.1)
14 packages in /hpux9/Users (zsh-2.5.02 less-200.magic.1)
14 packages in /hpux9/Editors (aXe-6.1.2 aXe-6.1.1)
14 packages in /hpux8/X11R4/XView3 (workman-1.2.2a ftptool-4.6b3)
13 packages in /hpux8/X11R4/Toolkits (andrew-5.1.part04 eXene-0.4)
12 packages in /hpux9/Maths/LinAlgebra (rlab.all-0.99i rlab-0.99i)
11 packages in /hpux8/Misc (gaps-5.11 csound-2.00b)
10 packages in /hpux8/Games (tankhunt-0.0.4 xics-2.2)
9 packages in /hpux9/Languages (swi-1.8.9 sgmls-1.1)
9 packages in /hpux8/Maths/Misc (gap.README-3.3 cdflib.f-1.4)
8 packages in /hpux8/X11R4/Graphics (xv-2.21 xscribble-a6)
8 packages in /hpux8/Sysadmin (rpasd-2.0 pltools-2.0.2)
8 packages in /hpux8/Languages (gofer-2.28b scheme-7.1.3)
7 packages in /hpux9/Physics (asa-3.15 ff-1.9)
7 packages in /hpux8/X11R5 (XR5src-5.23.part01 XR5built-5.23)
7 packages in /hpux8/X11R4/Networking (adcmail-0.9 collage-1.0b)
7 packages in /hpux8/Text (tr2latex-2.2a TeX-3.14)
6 packages in /hpux9/NeuralNets (lee-1.1 neuralnet-2.0)
6 packages in /hpux8/NeuralNets (am-6.0 GAucsd-1.4)
5 packages in /hpux8/X11R4/Core (MITlib-4.00 xlsclients-1.5)
5 packages in /hpux8/Users (xmodem-3.9 es-0.84)
4 packages in /hpux9/X11R6/Core (XR6built-6.02 XR6src-6.02.part03)
=======================================
631 packages in total
Name: http://www.csc.liv.ac.uk/intro.html
Contents: WWW interface to the Liverpool archive
Name: gopher://gopher.csc.liv.ac.uk
Contents: Gopher interface to the Liverpool archive
Name: wais://www.csc.liv.ac.uk/hpux
Contents: WAIS interface to the Liverpool archive
There is also a mail server at mail-server@csc.liv.ac.uk for users without FTP.
Name: ftp://hpux.ask.uni-karlsruhe.de
Contents: The official German mirror site of ftp.csc.liv.ac.uk
Name: ftp://ftp.cae.wisc.edu
Contents: The official US mirror site of ftp.csc.liv.ac.uk
Name: ftp://hpux.cict.fr
Contents: The official French mirror site of ftp.csc.liv.ac.uk
Site: ftp://ftp.prz.tu-berlin.de
Contents: Much of the Liverpool archive.
Site: ftp://export.lcs.mit.edu
Contents: The X Window System and contributed clients.
Site: ftp://hpcvaaz.cv.hp.com
Contents: X Window System libraries and utilities.
ftp://hpcvaaz.cv.hp.com/pub/700RX/released/b0502
contains the latest version of the 700RX software. There are
subdirectories for HP-UX hosts, Solaris and SunOS.
Site: ftp://ftpboi.external.hp.com
Contents: Drivers for HP printers.
Site: ftp://lut.fi/pub/hpux
ftp://lut.fi/pub/unix/hp-ux
Contents: Various
Site: ftp://nic.funet.fi/pub/unix/arch/hpux
Contents: Various
Site: ftp://prep.ai.mit.edu
Contents: The Free Software Foundation's GNU utilities, etc.
Site: ftp://hybrid.irfu.se/pub
Contents: X11 archive and shared libraries, full imake support,
and all missing .h files for both X11R4 and R5, dvi2pcl.
Site: ftp://geod.emr.ca
Contents: GNU stuff ported to HP-UX 9.x by Pierre Mathieu.
Site: ftp://col.hp.com
Contents: netperf, a network performance measurement tool.
Site: ftp://jazz.gsfc.nasa.gov
Contents: bathymetry, FFT, graph, pgplot, triangulation, sortroutine
Site: ftp://supportnet.mentorg.com/pub/mentortech/mgc_env/example/HPUX
Contents: Recommended patch list, this FAQ
Site: ftp://support.mayfield.hp.com
Contents: HP-UX patches available from FTP for SupportLine customers.
Site: ftp://patch.external.hp.com
Contents: European mirror of support.mayfield.hp.com
Site: ftp://jaguar.cs.utah.edu/dist
Contents: FSF compiler/assembler/debugger tools. Code usually
has PA specific bugfixes/enhancements not yet in the
official FSF releases. Source and binaries available.
hpux-symtab.h has symbolic debug format documentation.
hpgdb.patch has a gdb patch for HP compilers.
Currently available in the "dist" directory:
GDB 4.11.u2 - Last update 12/04/93
HPGDB 4.11.u2 - Last update 12/04/93
GAS 2.2.u2 - Last update 12/04/93
GCC 2.5.6.u4 - Last update 12/04/93
LIBG++ 2.5.2.u2 - Last update 12/04/93
Yes, you see gas-2.2; the first cut at a BFD based SOM assembler
for the PA is ready for external use. Release notes are in
README.gas.
The prebuilt binaries can be retrieved all at once from
hpuxbin.tar.Z, or in pieces from the hpuxbin directory.
Site: ftp://ftp.cs.colorado.edu/pub/sysadmin/utilities/
Contents: sudo in cu-sudo.v1.3.1-beta9.tar.Z
------------------------------
Subject: 3.13 Where can I get a demo CD with software for HP-UX?
See your friendly local HP sales rep to get a copy of the "Power On II" CD.
Additionally, they were distributed to Interworks 94 attendees. Be sure
and check out the Drive demo.
------------------------------
Subject: 3.14 HP-UX patch information
To determine what patches are installed:
The standard patch installation will leave a directory in /system
that is is name of the patch. For example, PHSS_3259 creates
/system/PHSS_3259
$lsf /system/PHSS_3259
CDFinfo copyright customize* index new/ orig/
The orig directory contains the modules that were replaced by the patch and the
new directory will contain any modules that were not installed for whatever
reason.
This can take up a lot of space, so you may want to archive this directory and
remove the new and orig sub-directories. You may want to leave the customize
file because it has a list of the modules replaced. To see the list do:
grep Patch customize | grep -v \#
Another place to look is in /etc/filesets:
$ls /etc/filesets/PHSS*
/etc/filesets/PHSS_1644 /etc/filesets/PHSS_2695 /etc/filesets/PHSS_3060
...
/etc/filesets/PHSS_2686 /etc/filesets/PHSS_3032 /etc/filesets/PHSS_3328
If someone has removed the /system/PHSS* directories and the PHSS*
entries in /etc/filesets, there is no easy way to tell what patches
are installed. You can tell if a given patch has been installed by
comparing what(1) and sum(1) outputs with those given in the
PHSS_nnnn.text file. Refer to question 7.11 about kernel patches.
How to get patches:
There are three ways to get patches.
If you have a support contract you can call the Response Center (800-633-3600)
and have the patches sent to you on magnetic media.
If you have Basic support or Response Center support you can access the Support
Line (ftp://support.mayfield.hp.com, ftp://192.6.148.19) and download patches
via ftp, uucp, or kermit. The access can be modem or internet.
Regardless of the support you have, you can get patches via e-mail via the
SupportLine mail service. To get the user guide, send e-mail to
<support@support.mayfield.hp.com>, with "send guide" in the text portion of the
message. No subject is required. The result is nroff-formatted; to get the plain
ASCII version, use "send guide.txt". In addition to patches, you can also access
online problem solving information, subscribe to mailing lists, and get
documents. One interesting service is the obsolete patch map; to get
it, send "send hp-ux_obs_patch_list" to the mail server.
John Morris of the Atlanta Response Center posts a weekly list of new patches
to comp.sys.hp.hpux on Mondays. It tells what's new and what patches are
replaced by the new patches, along with sizes.
A list of recommended patches for critical parts of 9.x is available for FTP at
supportnet.mentorg.com (see above for address and path), and is posted
as it changes to comp.sys.hp.hpux and other relevant newsgroups.
------------------------------
Subject: 3.15 How can I send mail to an "hpdesk" address?
For a person whose DESK address is:
JANE DOE /HP1234/XY
Ignore the subentity (XY) and use the form:
jane_doe@hp1234.desk.hp.com
Send them a test message and tell them to make a note of the return address,
as forming internet addresses on DESK is a little more complicated. If
there is an X.400 system between you and the DESK person, what you get back
may look like a very strange internet address, but it generally works.
Notice the underscore between names. Names can be first_last or last_first, but
first_last is easier to remember and get correct, especially if they have
initials in their name as in fred_l_doe@hpatc1.desk.hp.com. Be sure that the
DESK address they give you is exactly what is reported by DESK when they send a
message to themselves or look at the distribution list on a piece of mail the
recipient already has to verify the address.
(Thanks to Bob Niland and Bill Hassell)
------------------------------
Subject: 3.16 What are the known issues with porting BSD-based programs to HP-UX?
Mike Peterson <system@alchemy.chem.utoronto.ca> periodically posts
his list of BSD-HP tricks to comp.sys.hp.hpux. It is also archived on the
iworks FTP site (mentioned above) as "hptricks".
------------------------------
Subject: 3.17 What periodicals are available that focus on HP-UX?
o Interworks publishes The Works, a user group newsletter for Interworks
members.
o Interex publishes hp-ux/usr, an HP-UX focused newsletter.
o HP Professional (The Magazine for Hewlett-Packard Enterprise Computing)
This magazine covers MPE, HP-UX, PCs, peripherals and Networking for
HP users. Its focus is on both commercial as well as technical
computing. It is published by:
Cardinal Business Media, Inc.
101 Witmer Road
Horsham, PA 19044
(215) 957-1500 FAX: (215) 957-1050
email: simpson@cardinal.com (editor-in-chief)
o The HP Chronicle (The Independent Newspaper for HP Computer Users)
This tabloid-sized newspaper contains news from HP and other vendors
of compatible hardware, software and peripherals. Published by:
Publications and Communications, Inc
12416 Hymeadow Drive
Austin, TX 8750-1896
(512) 250-9023 Fax: (512) 231-3900
email: {cs.utexas.edu, execu, texbell}!pcinews!wks
Compuserve: 76011,307
MCI mail: PCI
EasyLink: 62755060
o HP/Apollo Workstation
A magazine that focuses specifically on HP/Apollo workstations.
Published by PCI (same as HP Chronicle).
o Open Systems Today (general Unix and other "open systems" weekly)
has a regular "HP Focus" section.
o Unix Review covers general Unix topics monthly.
(Thanks to Bill Hassell, HP, for most of this)
------------------------------
Subject: 3.18 Books on HP-UX
A recently published book on HP-UX system administration:
'The HP-UX System Administrator's "How To" Book'
by Marty Poniatowski
Prentice-Hall
ISBN 0-13-099821-4
If you're serious about adminstering HP-UX workstations, get this book.
Unfortunately, it fails to mention the Internet or this FAQ as
alternate resources, but it does discuss Interworks and Interex.
(Thanks to Mike Taylor, HP)
------------------------------
Subject: 3.19 HP-UX Sysadmin Mailing List
Bart Muyzer runs an HP-UX system administration mailing list. To reach
ALL MEMBERS of the list, send e-mail to <hpux-admin@cv.ruu.nl>; to SUBSCRIBE,
send mail to <hpux-admin-request@cv.ruu.nl>. The following commands (in the
subject line) can be handled automatically by the administrative request
filter processor <hpux-admin-request@cv.ruu.nl>:
subscribe - to subscribe yourself to the list
unsubscribe - to unsubscribe yourself from the list
members - to get a list of all subscribers
Problems, questions, suggestions and the like should go to the address
"owner-hpux-admin@cv.ruu.nl".
(Thanks, Bart!)
------------------------------
Subject: 3.20! HP-related WWW Sites
There are now several sites supporting WWW access on HP-related topics,
including HP itself.
The HP SupportLine World Wide Web service allows you to:
o Resolve software problems by searching up-to-date support and problem-
solving information;
o Browse news and current announcements; and
o Subscribe to automatically receive the latest Hewlett-Packard support
information.
The HP SupportLine World Wide Web service home page is located at URL:
http://support.mayfield.hp.com
The Hewlett-Packard World Wide Web home page (Access HP) is located at URL:
http://www.hp.com
Please forward all feedback about the HP SupportLine World Wide Web service
to webmaster@support.mayfield.hp.com.
Other HP-related WWW sites include:
Site: http://siihp.epfl.ch/HPUX/tools/disktab.html
Contents: Contains many disktabs for non-HP disks
Site: http://www.cis.ohio-state.edu/hypertext/faq/usenet/hp-faq/faq.html
Contents: This FAQ.
Site: http://www.csc.liv.ac.uk/FAQ/
Contents: This FAQ.
Site: http://www.csc.liv.ac.uk/intro.html
Contents: Interface to the Liverpool archive, including package descriptions,
man pages and screen shots as well as the packages themselves. Also
includes a WAIS server (wais://www.csc.liv.ac.uk/hpux) for searching
HTML documents relating to the archive.
Site: http://www.cs.ruu.nl/hpux-admin-archive/
Contents: Archive for the hpux-admin mailing list.
Site: ftp://supportnet.mentorg.com/pub/mentortech/mgc_env/examples/HPUX/faq.html.tar.Z
Contents: Compressed tar archive of the html version of the FAQ, suitable
for FTP for local access.
Site: http://www.eel.ufl.edu/~scot/tutor/
Contents: HP-UX 9.x Tutorial
Site: http://www.cs.ruu.nl/hpux-admin-archive/index.html
Contents: System Administrators Mailing List for HP-UX
Site: http://siihp.epfl.ch
Contents: French speaking HP www support (some info also in english like
benchmarks, disktab entries, etc...)
Site: http://www.eel.ufl.edu/~sessiont/tutorial/tofc.html
Contents: HP-VUE tutorial
------------------------------
Subject: 3.21! Who is this George Carter and how do I get rid of his posts?
George Carter is an ex-HP employee who makes frequent postings to
comp.sys.hp.misc. If you wish to remove his posts and most of the related
followups and if you are running rn, put the following commands in your
kill file:
/George Carter/a:j
/gcarter@infoserv.com/a:j
If you are using Gnus (an Emacs-based newsreader), type "M-k" in the
Subject buffer of the relevant newsgroup to expose the killfile,
insert these two lines into the killfile:
(gnus-kill "From" "gcarter@infoserv.com" '(gnus-summary-kill-thread nil))
(gnus-expunge "K")
and then type "C-c C-c" in the killfile buffer. From then on, you
will not see any thread trees rooted at an article from George Carter.
------------------------------
Subject: 3.22+ HP 500 Mailing List
There now exists a mailing list dedicated to the HP 9000 series 500 machine.
To get on (or off) the list, send email to
<hp9000-500-request@nvc.cc.ca.us>
with the word
subscribe
in the Subject: line.
(Thanks to Chris Osborn, <fozztexx@nvc.cc.ca.us>)
------------------------------
Subject: 4. THIRD PARTY VENDORS
------------------------------
Subject: 4.1 Third party vendors for RAM.
The following vendors are listed in alphabetical order. No guarantees
are made regarding compatibility or relative merit of the vendors.
Camintonn Clearpoint Research Corporation
22 Morgan 1000 E. Woodfield Road, Suite 102
Irvine, CA 92718 Schaumburg, IL 60173
(800) 843-8336 (708) 619-9227
(714) 454-6500
Concorde Technologies Dataram
7966 Arjons Dr. B-201 PO Box 7528
San Diego, CA 92126 Princeton, NJ 08543-7528
(800) 359-0282 (800) DATARAM
(619) 578-3188 (800) 799-0071
Digitial Micronics Eventide
2075 Corte Del Nogal 1 Alsan Way
Unit N Little Ferry, NJ 07643
Carlsbad, CA 92009 (201) 641-1200
Helios Systems Herstal Automation
1996 Lundy Ave 3171 West Twelve Mile Rd.
San Jose, CA 95131 Berkley, MI 48072
(408) 432-0292 (313) 548-2001
(800) 366-0283
IEM Infotek Systems
P.O. Box 1889 625 South Lincoln
Fort Collins, CO 80522 Suite 204
(800) 321-4671 Steamboat Springs, CO 80487
(303) 221-3005 (800) 767-1084
Intelligent Interfaces ISA Ltd
P.O. Box 1486 1-1-5 Sekiguchi
Stone Mountain, GA 30086-1486 Bunkyo-Ku
(800) 842-0888 Tokyo 112 Japan
81-3 (5261) 1160
US Office (Texas)
(713) 493-9925
Kelly Computer Systems Kingston Technology Corporation
1101 San Antonio Rd. 17600 Newhope Street
Mountain View, CA 94043 Fountain Valley, CA 92708
(415) 960-1010 (714) 435-2600
Martech Merida Systems
1151 W. Valley Blvd. (617) 933-6790
Alhambra, CA 91803-2493
(800) 582-3555
(818) 281-3555
MDL Corporation
15301 NE 90th St.
Redmond, WA 98052
FAX (206)861-6767
(800)800-3766
(206)861-6700
Newport Digital R Squared
14731 Franklin Avenue 11211 E. Arapahoe Rd., Suite 200
Suite A Englewood, CO 80112
Tustin, CA 92680 (303) 799-9292
(714) 730-3644 (800) 777-3478
(Thanks to Roy McMorran <mcmorran@ll.mit.edu>)
------------------------------
Subject: 4.2 Third party vendors for other things
Vendor Product(s)
------ ----------
Andataco System integrator and peripheral reseller
10140 Mesa Rim Road
San Diego, CA 92009
(619)453-9191
inquire@andataco.com
Disk Emulation Systems, Inc. Solid-state disk emulators (SSDs)
3080 Oakmead Village Dr.
Santa Clara, CA 95051
FAX: 408-727-5496
(408)727-5497
diskmsys@netcom.com
Interphase Corporation High performance bus interfaces (EISA/FDDI,
13800 Senlac VME/ATM.)
Dallas, Texas 75234
(214)919-9000
ITAC Systems, Inc. Supports Mouse-trak trackball for HP-HIL
3113 Benton St.
Garland, Tx 75042
(800)533-4822
yvonne@moustrak.com
MDL Corporation Disk, tape, optical, jukebox, EISA expansion,
15301 NE 90th St. RAID, others.
Redmond, WA 98052
FAX (206)861-6767
(800)800-3766
(206)861-6700
Modular Industrial MICHIL PS2 to HP-HIL converter. Allows standard
Computers PC keyboards and mice to be connected to HP
(615)499-0700 workstations
Joe Malley
SBE EISA serial and SCSI boards.
4550 Norris Canyon Road
San Ramon, CA 94583-1389
(510)355-2000
(800)925-2666
fax (510)355-2020
Workstation Solutions Data backup and recovery solutions.
One Overlook Drive
Amherst, NH 03031-2800
VOX: (603) 880-0080
FAX: (603) 880-0696
jimm@worksta.com (Jimm Parsons, Technical Services Manager)
(Thanks to various contributors)
------------------------------
Subject: 5. UTILITIES
------------------------------
Subject: 5.1 ASCII to Postscript converter.
You can get an ASCII to Postscript converter from:
ftp://ftp.uu.net/usenet/comp.sources.misc/volume10/a2ps3.Z
Additionally, nenscript is available from various FTP sites.
------------------------------
Subject: 5.2 How do I make perl on HP-UX?
Reply like this to Configure:
1. When it asks for optimization flags answer
+O1 if you have HP-UX 7.05 or less
-O if you have HP-UX 8.0 or later.
2. When it asks for additional flags to cc answer
-DJMPCLOBBER
3. When it asks for additional libraries answer
-lndbm -lm (ignore the other libraries Configure finds).
You can also safely add -lBSD if you wan't BSD signal semantics.
4. When it asks if you wan't to use perl's malloc answer
y
If you have HP-UX 8.07 or later you may choose to answer no to this since
that malloc is OK.
5. When perl asks on which boundarie a double must be aligned answer
8 if you are on a 9000/800 or 9000/700 series machine (HP-PA
architecture).
2 otherwise (Motorola 68k architecture)
------------------------------
Subject: 5.3 What is the status of the various gnu items on HP-UX?
Pierre Mathieu <mathieu@geod.emr.ca> periodically posts a list to
comp.sys.hp.hpux; the last revision is 2.3. Jeff Law of the University of Utah
maintains an archive on jaguar.cs.utah.edu of the latest PA-RISC ported compiler
tools; see question 3.10 above for details.
------------------------------
Subject: 6. X WINDOW SYSTEM, MOTIF, AND HP-VUE
------------------------------
Subject: 6.1 X11 libraries (Athena, etc.) and utilities (imake, etc.).
As you may have noticed, HP does not ship a "full" set of X11 libraries and
include files, and does not provide imake or associated tools. There is a HP
maintained, but UNSUPPORTED, set of X11R4 libraries and utilities for the HP
9000 Series 300, 400, 700, and 800. You can get the libraries, include files,
and config files (imake) via anonymous FTP from
ftp://hpcvaaz.cv.hp.com/pub/MitX11R4/libs.s*00.tar.Z.
This is also archived on the iworks node as mentioned above. HP has also
submitted X11R5 sources to the iworks node as mentioned above. And, Bo Thide has
X11R4 and R5 support available via anon. FTP as mentioned above.
------------------------------
Subject: 6.2 How can I display an image on the root window with HP-VUE?
Set Vuewm*backdrop*image: none. Note that there is an explicit pick for this
in the Style Manager with HP-VUE 3.0. When the backdrop is clear, you can use
xloadimage, xsetroot, xv, or the like to display the image of your choice.
------------------------------
Subject: 6.3 How do I get a scroll bar on hpterms?
Set the following resources:
HPterm*scrollBar: TRUE
HPterm*saveLines: 1024
or some other other arbitrarily large number. To do this interactively, use
"hpterm -sb -sl 1024". You can also set these in an app-default file
(/usr/lib/X11/app-defaults/HPterm). You can also set saveLines to something
like "4s", which indicates four screens.
------------------------------
Subject: 6.4 How can I put a title in my hpterm titlebar?
Here is a two line program that you might find useful:
/* Quick and dirty program to put argv[1] in the title bar of an hpterm
Tom Arons March 1992
*/
#include <string.h>
main(argc,argv)
int argc; char **argv;
{
printf("\033&f0k%dD%s", strlen(argv[1]), argv[1]);
printf("\033&f-1k%dD%s", strlen(argv[1]), argv[1]);
}
An alternative is:
#!/bin/sh
LENGTH=`strlen $1`
echo "&f0k${LENGTH}D$1\c"
In case in gets mangled, that's ESC between the first quote and the f0k.
strlen, in case you don't have it, comes from:
#include <stdio.h>
main(argc, argv)
int argc;
int *argv[];
{
if (argc != 2)
exit(0);
printf("%d\n", strlen(argv[1]));
}
(Thanks to Tom Arons <arons@ash.eecs.ucdavis.edu> and John T. Beck, HP.)
------------------------------
Subject: 6.5 How come my hpterms keep going away by themselves?
You are probably using the C Shell (/bin/csh) and have autologout set (it is
set to 60 minutes by default). Put an "unset autologout" in your ".cshrc".
If you are using the korn shell it is probably due to the value set for
the shell variable TMOUT. Set it to 0 (infinite timeout).
(Thanks to Jim Sharpe <jms@spatial.com> for the Korn Shell information.)
------------------------------
Subject: 6.6 How come my HP X/Motif clients take a LONG time to display on a Sun?
The problem is with the OW3 server. You can request OW3 patch 100444-35 (or
whatever is the current replacement) from Sun to fix the problem. Supposedly
this has been rolled into OW 3.0.1. A workaround is to set the X resource
*useColorObj: False on the Sun.
------------------------------
Subject: 6.7 How can I get my login stuff to work under HP-VUE?
When you login via VUE, VUE sources ~/.vueprofile *INSTEAD OF* your .login
(csh), .profile (sh/ksh), and other startup files. Whatever actions are
taken in ~/.vueprofile are persistent across any children started by VUE.
Meaning that if you symbolic link ~/.vueprofile to your ~/.profile, then
VUE will source your ~/.profile before starting the window system, and all
children (hpterms/xterms and their interactive shells) will inherit this
environment (prompt variables et al).
Documentation indicates your ~/.vueprofile should contain either csh, or sh/ksh
syntax, depending upon what your login shell is.
When csh is my login shell, I set my ~/.vueprofile to contain only two
lines:
if ( -f /etc/csh.login ) source /etc/csh.login
if ( -f ~/.cshrc ) source ~/.cshrc
When sh/ksh is my login shell, I set my ~/.vueprofile to contain only two
lines:
test -f /etc/profile && . /etc/profile
test -f ${HOME}/.profile && . ${HOME}/.profile
So, before starting the window manager and any clients, VUE makes sure that
all my shell startup files are sourced and all the variables I want in my shell
environment are already there and waiting for me.
(Thanks to Steve Jumonville, HP)
------------------------------
Subject: 6.8 How can I get console messages to go to an hpterm?
You can avoid console messages writing to your graphics planes and trashing your
VUE session by starting an hpterm and designating it to receive console
messages, and to de-iconify, when console messages are received. Put something
like this in your "vue.session" file in ~/.vue/sessions/home. (line wrapped
for readability):
# Start up the Terminal Console as iconic, and raise it if any output
vuesmcmd -cmd "hpterm -C -iconic -ls -sb -sl 256 -name Console -T Console
-xrm *mapOnOutputDelay:\ 30 -xrm *mapOnOutput:\ True
-xrm Console*clientFunctions:\ -close -xrm *workspaceList:\ all"
(Thanks to Steve Jumonville, HP)
------------------------------
Subject: 6.9 What happened to the vuewm key accelerators at VUE 3.0?
Well, we don't really know. Here's how to set them, though.
Add an entry like this (you can, of course, customize it to your
liking) to your $HOME/.vue/vuewmrc file:
Menu VueWindowMenu
{
"Restore" _R Alt<Key>F5 f.normalize
"Move" _M Alt<Key>F7 f.move
"Size" _S Alt<Key>F8 f.resize
"Minimize" _n Alt<Key>F9 f.minimize
"Maximize" _x Alt<Key>F10 f.maximize
"Lower" _L Alt<Key>F3 f.lower
no-label f.separator
"Occupy..." _O Alt<Key>O f.workspace_presence
"Occupy all" _a Alt Shift<Key>O f.occupy_all
no-label f.separator
"Remove from WS" _e Alt Shift <Key>F4 f.remove
"Close" _C Alt<Key>F4 f.kill
}
And then add this resource:
Vuewm*windowMenu: VueWindowMenu
And restart the window manager.
(Thanks to Bill Bennett, HP)
------------------------------
Subject: 6.10 How come I can no longer disable the caps lock key with xmodmap?
A common activity in the past has been to disable the, shall we say, "placement
challenged" caps lock key on the ITF keyboard using a simple xmodmap script.
This no longer works consistently at X11R5/VUE 3.0; the best solution so far:
In file ~/.vue/sessions/lite/vue.session:
/usr/bin/X11/xmodmap - << EOF
clear lock
keycode 55 = Control_L
keycode 86 = Caps_Lock
keycode 39 = grave asciitilde guillemotleft guillemotright
keycode 71 = Escape
add Lock = Caps_Lock
add Control = Control_L
EOF
This works until logout/login, when Caps Lock toggles the control feature, even
though 'xmodmap -pm' shows that Lock has no assignments. You have to restart the
server to reset completely, which can be automated by setting the value
Vuelogin*terminateServer: True
in the file /usr/vue/config/Xconfig.
------------------------------
Subject: 6.11 How come vi behaves strangely in xterms at 9.01?
Apparantly initial invocation of xterm under csh does not set LINES/COLUMNS
correctly, and vi doesn't handle that real well. One workaround is to put the
following in .cshrc:
if ( $?WINDOWID ) then
set noglob;eval `/usr/bin/X11/resize`;unset noglob
endif
PHSS_2753 addresses this problem.
(Thanks to Raymond Nijssen for the workaround.)
------------------------------
Subject: 6.12 How do I disable HP-VUE?
There have been several recommendations on this base thread. Here is one that is
documented for X terminals (it works for workstations too). This takes advantage
of the fact that Vue sets several environment variables for the session, one of
which is USER.
Modify the /usr/lib/X11/vue/Vuelogin/Xsession (pre-9.0 HPUX) or the
/usr/vue/config/Xsession (9.0 HPUX and later) file:
1) Go to the portion that contains the coment "Determine the startup
if the user didn't specify one." -- approximately line 295 in an
unaltered version of the file.
2) Add a following case statement to fit your needs. It should look
something like:
case $USER in
martha | joe) startup=${HOME}/.x11start''
esac
You can add as much or little intelligence to this as you like. The above
assumes that the users' have a .x11start script in their home directory, that
its permissions are correct, etc. You can build in a fallback machanism. For
example, the script will check to see if the user has a .x11start script and if
not, to fallback to /usr/lib/X11/sys.x11start. To see an example of this logic,
do a more(1) on /usr/bin/x11start.
The above case statement is documented in Ch 2 of the "HP 700/RX System
Administrators Guide".
(Thanks to Bill Morrison, HP)
------------------------------
Subject: 6.13 What's a good termcap entry for hpterm?
Although it is not supported for hpterm use, the 262x entry in
/etc/newconfig/termcap will work.
(Thanks to Frank Slootweg, HP)
------------------------------
Subject: 6.14 My screen is wedged. What should I do?
One thing you can try is to unplug the keyboard for ~5 seconds. Note that
you will have to rerun xset -r to get autorepeat to work after doing this.
(Thanks to Paul Liebert, HP.)
------------------------------
Subject: 6.15 How can I get an X client to come up in an alternate workspace?
You can try:
client -xrm "*workspaceList: <name>"
(Thanks to <finger@rz.uni-karlsruhe.de>)
------------------------------
Subject: 6.16 How can I get HP-VUE to not override colors?
The Motif library on HP-UX has extra code added to make the default colors
follow the color schemes that the user selects with the vuestyle controls. This
extra code makes trouble for some applications which don't want this unique and
unexpected behavior.
You can prevent the entire color scheme mechanism from being used in an
application by setting "*useColorObj: False" for the application before creating
the first widget. This can be done by adding the resource to the application
defaults, the fallback resources, or as an extra "-xrm" "*useColorObj: False"
args pair in the argv and argc parameters passed to XtAppInitialize. If you set
the resource in xrdb it would be best to set it for only specific applications
like "MyApp*useColorObj: False".
Setting the useColorObj resource could make programs core dump on some 8.0*
systems. There is a patch that corrects the core dump.
You can use the vue colors and prevent the specific difference between dialog
colors vs. non-dialog colors by setting a resource that specifies the behavoir
of the color scheme mechanism. To force the dialogs to use the same colors as
the other windows set the following resources in your app_defaults file or
fallback settings-
*primaryColorSetId: 3
*secondaryColorSetId: 3
This sets the dialog or "secondary" colors to the same set as the primary
colors. This is discussed in the "HP VUE 3.0 User's Guide" in chapter 26.
(Thanks to Mike Stroyan, HP.)
------------------------------
Subject: 6.17 How can I override the system default printer in vuepad?
cp /usr/vue/types/vuepad.vf $HOME/.vue/types
Edit the file and change the ACTION PRINT_PR_VPAD to:
# The PRINT_PR_VPAD action paginates its arguments using pr(1) and prints
# them with lp(1). It uses arg 2 for a title. It then removes the temp
# file. This action is used by the client vuepad.
ACTION PRINT_PR_VPAD
TYPE COMMAND
WINDOW-TYPE NO-STDIO
EXEC-HOST %LocalHost%
EXEC-STRING /bin/sh -c "pr -h %Arg_2% %(File)Arg_1% | \
lp -d%"Printer:"%; rm %(File)Arg_1%"
^^^^^^^^^^^^^^
END
This will cause a dialog box to appear to prompt you for a printer name.
However, if you set LPDEST in your .vueprofile, then lp will use that
value instead of the system default.
(Thanks, Dan Mercer, <damercer@mmm.com>)
------------------------------
Subject: 6.18 What about X11R6?
The basic core distribution of X11R6 is now installed on the Liverpool FTP
archive. See section 3.12 for details.
Current contents:
XR6src-6.0.part0{1,2,3}.tar.gz
XR6built-6.0.tar.gz
Notes:
- the binaries are designed to be installed in /usr/local/X11R6
(use a symbolic link, or grab the source if you want them elsewhere)
- most libraries come with archive and shared versions
(and the built binaries mostly use the .sl versions)
- this is JUST the core distribution (xc/)
- xc/test and xc/workInProgress aren't included in the built package
(the source is present, but hasn't been looked at in the src packages)
(Thanks to Dave Shield, Liverpool)
------------------------------
Subject: 6.19 How can I set user-specific app-defaults in HP-VUE?
HP-VUE looks in the directory $HOME/.vue/app-defaults in addition
to the default location (/usr/lib/X11/app-defaults).
------------------------------
Subject: 7. OPERATING SYSTEM
------------------------------
Subject: 7.1 Can I have filenames longer than 14 chars?
Yes, change to long filenames using /etc/convertfs. You can't go back, though.
Here's how to check if an existing filesystem has long filenames enabled:
# tunefs -v /dev/rdsk/XXX | grep magic
magic 95014 clean FS_OK time Tue Mar 23 14:13:01 1993
\__ if = 95014 then long filenames
\__ if = 11954 then short filenames
You can also look at this on a per directory basis with the POSIX
command getconf:
$ getconf NAME_MAX directory
(Thanks to Ken Burke and Masataka Isoya <Masataka_Isoya@yhp.hp.com>)
------------------------------
Subject: 7.2 How can I tell what products have been loaded on my system?
Check the /etc/filesets directory. There is a file there for each fileset that
has been loaded that summarizes the files in that fileset. This directory is
used by the /etc/update, /etc/updist, /etc/netdistd, and /etc/rmfn utilities
for loading and unloading software.
------------------------------
Subject: 7.3 How do I safely remove software from my system?
The _only_ safe way to remove HP software is to use /etc/rmfn.
------------------------------
Subject: 7.4 What's the scoop on HP-UX 9.03/9.04?
HP-UX 9.03 and 9.04 have now been officially released from HP and are
available on request from your software support coordinator. Support
is included for the 712 workstations, and many patches are included.
------------------------------
Subject: 7.5 How come HP-UX doesn't support NFS root access?
HP-UX versions previous to 9.X do not support NFS root access to mounted
file systems. This because they are at an old revision of NFS. You *can* hack
your kernel to provide it, but it's dangerous, unsupported, and a security
hole. 9.X supports full NFS 4.1 functionality, including NFS root.
------------------------------
Subject: 7.6 How can I change the order of hostname resolution?
Patches PHCO_3703/3704 (700/800) and PHNE_3686/3687 allow configuration of the
order of hostname resolution. For more detail, see the docs in PHNE_3686; the
bottom line is that it's like Solaris 2.x. You can also just patch the
YP server to do DNS fallback only with PHNE_4097.
------------------------------
Subject: 7.7 How come the LOGnnnn files in /usr/adm keep growing and growing?
The LOGnnnn files in /usr/adm (8.x except 8.02) or /usr/adm/diag (8.02 and 9.0)
are the diagnostic event log files. Most likely the files are growing for
one of two reasons: either the diagnostics system was improperly installed,
or there is an actual hardware problem on the system.
(Thanks to Wayne Krone of HP)
------------------------------
Subject: 7.8 How come I can't lock mail or other files on a Sun?
Believe it or not, Sun's lockd is broken at 4.1.x. The proper Sun patch
number is Patch-ID# 100075-09, called the "lockd jumbo patch".
------------------------------
Subject: 7.9 Why are mail files in /usr/mail are owned by daemon instead of the recipient?
The mail delivery agent /bin/rmail needs to be able to chown(2) these files.
It cannot do so if you have removed the privilege CHOWN (see setprivgrp(1m);
removing CHOWN is recommended to prevent cheating on disk quotas). To get
around this, noting that /bin/rmail runs setgid to group mail, you can grant
privilege CHOWN to group mail only by inserting the line "mail CHOWN" in
/etc/privgroup. The change takes effect on the next reboot, or immediately
if you execute the command "setprivgrp -f /etc/privgroup".
(Thanks to Jim Richardson <jimr@maths.su.oz.au>)
------------------------------
Subject: 7.10 How can I tell if I need more than a 2-user license?
There are several fundamental things to remember about HP-UX licensing:
o Series 700 and Series 800 users are now counted the same way
o Display console counts as one user
o Each ASCII terminal counts as a user, regardless of how it is
connected
o The LAN connection counts as one user
Ascii Terminals
The simple rule to remember is any ASCII terminal that is logged in counts
as a user.
ASCII terminal connections can come in several different forms:
o Direct-connected via a serial terminal multiplexer
o Connected via Data Terminal Concentrators (DTCs) or via
terminal servers
o Personal Computers (PCs) acting in terminal emulation mode,
whether connected via serial line or via Local Area Network (LAN)
X-terminals and workstations
When a customer buys an X-terminal or workstation from HP or from
another vendor, HP acknowledges that the customer has also bought a
single Unix license-to-use.
Therefore, the customer has the right to an unlimited number of logins and
terminal windows _over_the_LAN_ to a Series 700 or Series 800 from either
X-terminals or workstations. These logins can be via X terminal windows
(_hpterm_ and _xterm_), _telnet_, _rlogin_, or other means.
PC's that use X-terminal emulation software such as XView each count the
same as an X terminal. This is because the PC essentially becomes an
X-terminal when it is running the X server software. Therefore, when a PC
is running an X-terminal emulator, the PC has the right to an unlimited
number of logins to an HP-UX system.
Exceptions
The policy of counting DTC users is new for the Series 700. Customers who
purchased Series 700 systems prior to HP-UX 9.0 shipments (late calendar
1992) and use them as host systems for multiple DTC- connected terminals,
may continue to use those configurations without buying a license upgrade.
An update to HP-UX 9.0 will not lock out these configurations.
(Thanks to Tony Hart, HP)
------------------------------
Subject: 7.11 How can I tell what patches are in the kernel?
"what /hp-ux" will present you with patch strings, which you can compare with
the strings called out in the patch text file. A typical patch string is:
PATCH_8.07 nfs_vnops.c 1.15.61.4 92/01/10 PHKL_0736 PHKL_0942
which shows that PHKL_0942 has been applied to the kernel.
------------------------------
Subject: 7.12 How come I have to hit return after control-d in the Korn shell?
You need to set the "viraw" option.
------------------------------
Subject: 7.13 How do I boot into single user mode?
Press ESC to stop the auto-boot.
When the list of boot devices is presented:
b PX ISL (where X is your root disc)
And at the ISL> prompt:
ISL> hpux -iS disc(;0)/hp-ux
The '-iS' are the flags to init which says come up single user. The rest of
the command is what the bootprocess does automatically.
(Thanks to Stuart Jarriel <stuart@TIVOLI.COM>.)
------------------------------
Subject: 7.14 How come my Korn shell login hangs?
This can happen if the user's home directory is across an NFS mount point; you
can workaround the problem by completely unprotecting (chmod 777) .sh_history,
or by pointing HISTFILE to somewhere local.
------------------------------
Subject: 7.15 How can I avoid those annoying copyright notices on login?
The following code in /etc/profile prints the copyright notice the first
time each user logs in:
NUMLOGINS=`/etc/last | grep $LOGNAME | wc -l`
if [ $NUMLOGINS -lt 2 ]
then
cat /etc/copyright
fi
And, for /etc/csh.login:
set NUMLOGINS=`/etc/last | grep $LOGNAME | wc -l`
if ( $NUMLOGINS<2 ) cat /etc/copyright
(Actually, each user will get the copyright on their first login after each
time the /etc/wtmp file is pruned, but that needn't be often.)
(Thanks to Paul Gootherts, <pdg@cup.hp.com> and Steve Dum,
<steve_dum@mentorg.com>)
------------------------------
Subject: 7.16 How can I turn off quota checking?
The safe way is to use /etc/rmfn to remove the QUOTA fileset.
------------------------------
Subject: 7.17 What are the issues with HP-UX 9.01?
Some of the things that people have seen with HP-UX 9.01. Problems that
have been patches are noted; see the latest patch catalog for specific
patch numbers.
rmfn of the NW-7XX fileset leaves behind an empty directory (/etc/conf/netware)
and subsequent kernel builds (for patch install) fails until this directory is
removed by hand.
When the length of a macro expansion exceeds an unspecified size, cpp.ansi
leaves some macros unexpanded in the output. Patched.
The linker does not traverse shared library search paths itself. Patched.
Various X11 problems have been reported including drawing problems
and memory leaks. Get the latest X server.
Various serious C compiler problems. Patched.
Memory leaks can occur and lock up a system; patched.
catman will core dump; patched.
There has been some controversy over the implementation of the dynamic buffer
cache at 9.01; people have been seeing situations where the cache has grown
quite large and the syncer takes over the system swapping it out. You can limit
the growth of the buffer cache to physical memory (default) with patch
PHKL_2449, or you can disable it altogether with the "bufpages" kernel
parameter; set bufpages to 10% of your physical memory, e.g. if you have an
S700 with 16M of memory, set bufpages to:
bufpages = 16,000 K physical ram / 4 K per page / 10 (percent ) = 400
(Thanks to various people, too numerous to mention.)
------------------------------
Subject: 7.18 Why does chown behave differently at 9.x?
chown(2) on symbolic links now chown's the file which the link is pointing to
instead of the link itself. If you want to go back to the olf behavior, you
can set the 'hpux_aes_override' parameter to '1'. This can be done by
modify /etc/master ('hpux_aes_override AES_OVERRIDE 1') and changing
the dfile 'hpux_aes_override 1'. Or by adb'ing the kernel;
adb -w /hp-ux /dev/kmem
hpux_aes_override?W 1 # For the /hp-ux
hpux_aes_override/W 1 # For the current kernel
$q
(Thanks to Trond Haugen, HP)
------------------------------
Subject: 7.19 How can I track log files and core files?
At 9.x, SAM allows you to track all standard log files and trim them if
desired. It will also find all core files on a file system and allow you
to get rid of them.
------------------------------
Subject: 7.20 How much memory can a process use?
The first limiter is probably swap space. The combined virtual data space
of all running processes can't exceed swap size. Run /etc/swapinfo -t and
look at the total line. That's all you have left.
For FORTRAN programs:
--------------------
1) Increase the kernel's stack limit (maxssiz). You can do this with
sam (Kernel Configuration-> Modify Operating System Parameters->
Process Parameters). The practical limit for user stacks is around
80 Mbytes. Your system probably has an 8 Mbyte limit. Try 16 Mbytes
or 32 Mbytes depending on your expected use. Give sam a number that
is a multiple of the 4096-byte pagesize.
2) Change your array allocation. HP FORTRAN allocates non-common,
non-SAVE'd arrays on the process stack. Common blocks and SAVE'd
variables are allocated in the process data segment (with much larger
size limits). If your arrays are declared in the main program and
passed to subroutines, you can just SAVE the big ones in the main
program, or put them in a common block in the main program, or
recompile with -K since -K puts all local variables in the data
segment. (-K is a sledgehammer approach, but it gives you a quick
indication that stack size is the issue.)
3) Make sure you have enough swap space.
-------------------
(Thanks to Bob Montgomery, HP)
------------------------------
Subject: 7.21 How come there's little discussion of DCE?
DCE (Distributed Computing Environment) is an OSF-based product. HP now
ships a DCE product. Most of the discussion concerning DCE takes place
in comp.unix.osf.misc.
------------------------------
Subject: 7.22 How can I make a ramdisk?
THIS IS UNSUPPORTED. Make sure 'ram' is configured into your kernel, and then
make device files with major 9 (both blcok and char), minor 0xVSSSSS, where V is
the volume number, SSSSS is the number of sectors in the ram disk, and a sector
is 256 bytes. For example,
mknod /dev/ram1m c 9 0x101000
makes a 1 meg ram disk. Of course, you have to make a file system on it and
mount it to make it useful.
(Thanks to Rob Gardner, HP)
------------------------------
Subject: 7.23 How come I can't lock files across NFS after upgrading to 9.01?
You may need to replace your /etc/group with the 9.01 version:
Upgraded 9.01/ Installed
8.07 version 9.01 version
root::0: root::0:root
other::1: other::1:root,hpdb
bin::2: bin::2:root,bin
sys::3: sys::3:root,uucp
adm::4: adm::4:root,adm
daemon::5: daemon::5:root,daemon
mail::6: mail::6:root
lp::7: lp::7:root,lp
users::20: users::20:root
nogroup:*:-2:
(Thanks to Robin Strong <gandalf@austin.lockheed.com>)
------------------------------
Subject: 7.24 What's a good strategy for clearing /tmp?
Two suggestions (to be run from cron) are:
find /tmp -depth -hidden -fsonly hfs -atime +1 -exec rm -rf {} \;
The -depth option ensures no directory is removed before its contents,
-fsonly hfs is because occasionally I've NFS-mounted stuff there and
it's better to do the clearing in the machine where it's local,
and -hidden is in case CDF's appear there for some reason.
(Thanks to Tapani Tarvainen)
for i in /tmp /usr/tmp
do
find $i -type f -atime +3 -print -exec rm -f {} \;
find $i -type d -atime +3 -print -exec rmdir {} \;
done
(Thanks to Rich Jennings, HP)
------------------------------
Subject: 7.25 How can I change the timezone?
Edit the entry in /etc/src.sh and /etc/src.csh, and reboot.
------------------------------
Subject: 7.26 How can I look at what my system is doing?
The best tool for monitoring your system is HP GlancePlus. In the U.S. call
(800) 237-3990 for a trial version. Outside the U.S. contact your HP sales
representative. HP sells other performance tools as well including HP
Performance Collection Software, HP PerfRX (for long-term performance
analysis of a single system), and HP PerfView which runs under OpenView
(for simultaneous monitoring of a network of systems including HP-UX, Sun
Sparc, and IBM AIX). You can also use /usr/contrib/bin/monitor if it
exists on your system, but it is not as accurate or reliable as GlancePlus,
and is not an HP supported product.
------------------------------
Subject: 7.27 How can I partition HP-UX disks on 700s?
Here is a sample file which lists the sdsadmin commands to partition a disk
into 2 partitions. Note that this is specific to the M2654SA disk;
your mileage may vary. The mediainit is probably not required if the vendor
has formatted/verified the disk. It is not "supported" to partition
the boot disk, and you have to go through some contortions to do it.
Note also that in order to have several partitions on the root disk
AND have swap, you must create another partition which you dedicate
to swap.
#
# SDS configuration file for this node.
#
# To rebuild the /u1 and /news Fujitsu M2654SA disk partitions, do:
# mediainit -v /dev/rdsk/c201d5s0
# sdsadmin -m -C /usr/local/etc/sdsadmin.config.u1news /dev/dsk/c201d5s0
# newfs -L -n -v -m 2 -i 16384 /dev/rdsk/c201d5s1 HP_M2654Su1x1-2
# newfs -L -n -v -m 2 -i 2048 /dev/rdsk/c201d5s2 HP_M2654Su1x1-2
#
# Disk partitions:
#
# 1 /u1 145xxxx 1K blocks (/dev/dsk/c201d5s1, /dev/rdsk/c201d5s1)
# 2 /news 55xxxx 1K blocks (/dev/dsk/c201d5s2, /dev/rdsk/c201d5s2)
# - ----- -------
# 2006016 1K blocks
#
type M2654Su1x1-2
label u1_news
partition 1
size 1450000K
partition 2
size max
(Thanks to Mike Petersen and Timothy Mooney <mooney@pinky.cc.ndsu.nodak.edu>)
------------------------------
Subject: 7.28 How can I print man pages successfully?
To get the italic and bold fonts from the man file on a Laserjet:
zcat manfile.1 | nroff -man -Tlj | lpr ...
On a PostScript printer ( you need the GNU groff):
zcat manfile.1 | groff -man -Tps | lpr ...
If your man file is a complex one including tables, pipe it through tbl.
Some man pages like ioctl may need the HP macros:
zcat manfile.1 | groff -t -e -C -M/usr/lib/tmac -man -Tps | lp ...
(Thanks to Poul Moller, Markus Gyger)
------------------------------
Subject: 7.29! How can I limit core files?
HP-UX has no built in function to limit core file generation from the standard
shells; one way to limit core file generation is to create a directory called
"core" with 000 permissions in the directory in which you expect a core dump to
occur. Additionally, two programs are available (nocore and corelimit) that
can be used as wrappers around other programs that you may expect to dump.
And, some publicly available shells (tcsh, for example) allow core file
limits. Or, you can place a link called "core" to /dev/null in the directory
you expect the core dump to occur.
Here is the source for corelimit (thanks to John Agosta, HP). It is
completely unsupported; the Response Center will disavow all knowledge
of you and your mission should you call them with a problem relating
to this. Build it in the usual way (cc -o corelimit corelimit.c) and use it
in the format of: "corelimit hpterm 0". This will limit the core file
size of all children of the hpterm process to 0.
#include <stdio.h>
#include <sys/resource.h>
#define RLIMIT_CORE 4 /* core file size */
main(argc, argv)
int argc;
char **argv;
{
int res;
struct rlimit rlp;
if (argc != 3) {
fprintf(stderr, "%s: wrong number of parameters\n", argv[0]);
fprintf(stderr, "\tformat: %s command core_size\n", argv[0]);
exit(-1);
}
rlp.rlim_cur = atoi(argv[2]);
res = setrlimit(RLIMIT_CORE, &rlp);
if (res < 0) {
perror("setrlimit: RLIMIT_CORE");
exit(-2);
}
system(argv[1]);
}
------------------------------
Subject: 7.30 Can I put more than one backup on DDS with fbackup?
No. fbackup always rewinds the tape. Possible alternatives:
(1) Stick with dump.
(2) Use a pipe: instead of telling fbackup where the DAT is,
let it send its output to stdout (-f -) and pipe it
(thru remsh from the other machine) to the DAT, using
no-rewind device. You'll lose fast search ability, though.
(3) Turn your machines into a cluster served by the one with the DAT
and do all backups there. Unfortunately clusters are
not supported at hp-ux 10.0, so this is not a long-term solution.
(4) Use NFS and mount the disks of the machine without DAT to the other
and back them both up there. You'll have to mount 'em with root
permissions and restoring a completely destroyed root disk will be messy.
(5) Scream at HP until they fix fbackup. :-)
(Thanks to Tapani Tarvainen, tt@math.jyu.fi)
------------------------------
Subject: 7.31 How can I load multiple patches on a machine at the same time?
The easiest way to do it is to set up a netdist server by using /etc/updist
to load all the patches you want into a netdist area, and then starting
/etc/netdistd.
------------------------------
Subject: 7.32 How can I set up an HP-UX workstation as an X terminal?
Install minimum OS with network and X11 (without motif or vue).
Edit /etc/inittab, change the following lines
init:2:initdefault:
vue :34:respawn:/etc/vuerc # VUE validation and invocation
to
init:3:initdefault:
vue :34:respawn:/usr/bin/X11/X -query HOSTNAME # X server startup
Replace HOSTNAME by the name of the host running xdm, vuelogin or whatever.
(thanks to Kay Marquardt, <K.Marquardt@zhv.basf-ag.de>)
------------------------------
Subject: 7.33 What causes "Unable to initialize MI" when running Glance?
This error can occur for many different reasons but it indicates that the
glance program had trouble starting the midaemon process. Further details
are available in ~/glance.err and/or /usr/perf/log/`hostname`/midaemon.err.
See man midaemon(1).
Older revisions of HP GlancePlus (prior to B.09.00 for series 700/800
systems and prior to A.09.07 for series 300/400 systems) had a Known
Problem in which it was occasionally necessary to issue the following
command when the above error occurred:
rm /usr/perf/databases/`hostname`/*.data
Do NOT remove other files in the directory /usr/perf/databases/`hostname`/
because they may be required for other performance tools such as HP PerfRX
or HP PerfView.
This problem has been fixed in the current release of HP GlancePlus (versions
B.09.00 or greater for s700/800).
Please contact your HP Support Representative when you experience problems
with HP software products. Your HP support contact will know how to obtain
additional information to characterize your specific problem. Please
note the product version (ie: "what /usr/perf/bin/glance") when reporting
problems.
(thanks to Doug Grumann <dougg@hpptc3.rose.hp.com>)
------------------------------
Subject: 7.34 How come I can't get all of my swap space?
The default value of the kernel parameter "maxswapchunks" limits the swap
accessible by the kernel to 512M; if you configure more swap, you need
to increase maxswapchunks.
------------------------------
Subject: 7.35 How come I can't start my Aserver?
Often this is because "localhost" isn't configured in DNS. Try:
nslookup localhost
If that command fails, you will want to have an entry added to your
name servers for "localhost.your.particular.domain" pointing at
127.0.0.1.
(thanks to rick jones)
------------------------------
Subject: 7.36 How can I get a daemon to successfully start from /etc/rc?
/etc/rc will kill all child processes on exit; daemons started from
localrc() (for example) must have called setsid() and have been
given time to daemonize (what a word!) themselves.
(thanks to Mike Peterson, <system@alchemy.chem.utoronto.ca>)
------------------------------
Subject: 7.37 How come my /dev/null keeps getting blown away?
Apparantly this can occur if root invokes the C compiler on a nonexistant
file.
------------------------------
Subject: 7.38 How can I track network packets?
*******************************************************
*
* Network Tracing with nettl - for HPUX 8.x and up
*
*******************************************************
TRACING - trace all packets seen by the device driver
on the HP nodes, except diskless packets.
These packets are those packets sent by the
node, or addressed to the node.
1. Start Trace - put data into 1MB trace file. The data
will be stored in /tmp/raw.TRC0 and /tmp/raw.TRC1
The most recent data will always be in TRC0, when
it fills up, TRC0 is renamed TRC1, and new logging
continues in the TRC0 file. They fill up quickly!
/etc/nettl -tn pduin pduout -e all -f /tmp/raw
If neding to trace LOOPBACK interface as well,
consider:
/etc/nettl -tn pduin pduout loopback -e all -f /tmp/trace
2. Stop trace as soon as an event occurs!
/etc/nettl -tf -e all
3. Format trace into a print file:
/etc/netfmt -N -n -l -f /tmp/raw.TRC0 [ -c /tmp/filter ] > /tmp/fmt0
/etc/netfmt -N -n -l -f /tmp/raw.TRC1 [ -c /tmp/filter ] > /tmp/fmt1
-N - print in "nice" format (e.g. interpret)
-n - print IP addresses, not hostnames
-l - do not highlight fields (for hpterm)
-f - optional, use a filter file (see "filtering", below)
NOTE - netfmt takes a while to run!
There will be plenty of info in the trace file -
Interpretation may be necessary!
3a. Filtering. Create a filter file to tell netfmt what packets you
are interested in seeing.
E.g. only display packets to/from IP address 192.10.10.1:
filter ip_saddr 192.10.10.1
filter ip_daddr 192.10.10.1
Filter out all put NFS packets (to/from UDP port 2049)
filter udp_sport 2049
filter udp_dport 2049
Filter out all but TCP packets to/from port 25 (sendmail)
filter tcp_sport 25
filter tcp_dport 25
Filter on ethernet addresses:
filter dest 08-00-09-49-91-4a
filter source 08-00-09-49-91-4a
You can put these together (e.g. filter all NFS packets to/from IP addr)
filter ip_saddr 192.10.10.1
filter ip_daddr 192.10.10.1
filter udp_sport 2049
filter udp_dport 2049
(thanks to Brian Hackley, <hackley@apollo.hp.com>)
------------------------------
Subject: 7.39 How come my processes keep dying at 67M memory usage?
You need to adjust the kernel parameter "maxdsiz"; by default the per
process data space is limited to 67M. Adding physical memory and swap
will have no effect until you modify the parameter.
------------------------------
Subject: 7.40 Is it possible to artificially limit the memory size?
WARNING: this is non-standard, unsupported, and may change
from release-to-release.
For 9.01 and 9.03, there is a variable in the kernel called
"soft_pages". The value is normally zero. If set to some number
between 256 and the number of pages in your system, only that number
of pages will be allocated as the physical memory in your system.
To use this, first copy your kernel from /hp-ux to something else,
so that you can recover, if necessary (this variable can be set to
a small enough value that the system will be unbootable). Then
to set up a, say, 16 MByte system, do:
adb -w /hp-ux
soft_pages?W 0D4096
or
soft_pages?W 1000
Remember that the number of physical pages is not the only thing that
goes into a minimum configuration---you also have to scale kernel
parameters such as nproc and other tunables appropriately.
------------------------------
Subject: 7.41+ How come my alt key combinations don't work in emacs X mode?
Run the following through xmodmap:
!
! The following is modified from some code received from bjarne@hsr.no (Bjarne Steinsbø):
!
keysym Alt_L = Meta_L
keysym F12 = Multi_key
clear mod1
add mod1 = Meta_L
clear mod2
add mod2 = Alt_R Mode_switch
! This is magic!
keysym Alt_R = Mode_switch
The result is:
- The left Alt key acts as the Meta key.
- The right Alt key (Alt Gr) selects the extra characters Martin is talking about.
(e.g. AltGr-o = ø).
- It is even possible to use both Alt keys together, resulting in Meta-versions
of the extra characters.
(Thanks to Geir Atle Storhaug <gas@globus.ffi.no>)
------------------------------
Subject: 7.42+ I can't get Flex LM based licensing to work.
For some reason, Flex licensing requires /dev/lan0 to have
read and write permissions for everybody. This is somewhat insecure.
One workaround is:
1. Create a new group call "lan0".
2. chgrp/chmod /dev/lan0 to look like this:
crw-rw---- 1 root lan0 52 0x202000 May 20 1993 /dev/lan0
3. chgrp/chmod g+s on any binaries that need to access /dev/lan0.
For example, for Interleaf, we did this to /interleaf/ileaf5/hp700/bin:
-rwxr-sr-x 1 compsci lan0 5255168 Jan 29 1992 ileaf
(Thanks to Richard Lloyd, Liverpool)
------------------------------
Subject: 8. COMPILERS AND LINKERS
------------------------------
Subject: 8.1 What's a P-FIXUP error?
Several questions on comp.sys.hp.hpux have involved the Gnu C compiler
and the linker message below :
gcc test_h.o -o test_h ../libg++.a -lm
ld: R_DATA_ONE_SYMBOL fixup in file ../libg++.a(streambuf.o) for code unsat
symbol "abort" - use P' fixup
collect: /bin/ld returned 1 exit status
This is caused by the code generator emitting assembly code in a data
subspace to initialize a function pointer, equivalent to :
.word foo
where (in this case) foo() is an extern, and shared libraries are referenced
by the executable being built (usually libc.sl).
NOTE:
This problem has been fixed in gcc-2.4.5.u5; if people are still running
into this error, then:
1) They've got an old version of gas (pa-gas-1.36.u8 I belive is the
first one do handle this correctly).
2) They're linking with a library built with some old combination of
gcc and gas.
The solution is to make sure gcc and gas are up-to-date and any libraries
have been built with the latest gcc/gas combination. For a temporary
workaround the option "-static" to gcc will suppress dynamic linking and
thus avoids the error.
(thanks to Carl Burch, HP for the original, and Jeff Law
<law@snake.cs.utah.edu> for the followup)
------------------------------
Subject: 8.2 Where is regcmp on HP-UX?
RTFM - from man regcmp:
regcmp and regex are kept in /lib/libPW.a, and are linked by using the
-lc and -lPW options to the ld or cc command. See WARNINGS below.
(thanks to Andre Srinivasan, <andre@cs.pitt.edu>)
------------------------------
Subject: 8.3 How come the default C compiler is brain-dead?
The C compiler shipped with HP-UX is intended only to rebuild the kernel
with, not for program development. To get a "real" C compiler, you must
buy the ANSI C program development bundle.
------------------------------
Subject: 8.4 How do I deal with "too many defines"?
Use the "-Wp,-Hxxxxxxx" where xxxxxxxx is the number of bytes to add to cpp's
table size.
There is no equivalent in lint or cflow to the cc driver's -W flag to
pass options to subprocesses like cpp. However, both lint and cflow
invoke cpp via the cc driver, so you can achieve the same effect by
setting the CCOPTS environment variable. For example,
CCOPTS="-Wp,-H500000"
export CCOPTS
lint large_file.c
------------------------------
Subject: 8.5 How come I get "_builtin_va_start" undefined when I build with gcc?
The <varargs.h> and <stdarg.h> include files define va_start in terms of
this function, which is built-in on the HP C compiler.
If you're using GCC you should be picking up include files
from the gcc library directory. These include files do the right
thing for both GCC and HP C.
More often than not these files were never installed, or someone has
placed a copy of varargs.h/stdarg.h into /usr/local/include (gcc searches
there *first*).
When all else fails, you can replace the definition of va_start as follows,
depending on whether you are using varargs or stdarg (K&R or ANSI,
respectively).
#include <varargs.h>
#ifdef __hppa
#undef va_start
#define va_start(a) ((a)=(char *)&va_alist+4)
#endif
#include <stdarg.h>
#ifdef __hppa
#undef va_start
#define va_start(a,b) ((a)=(va_list)&(b))
#endif
For <varargs.h>, this replacement should always work.
For <stdarg.h>, this replacement will work unless the last fixed
parameter ("b" in the call to va_start) is a structure larger
than 8 bytes. Large structures are passed by reference, with the
callee responsible for copying the structure to a temporary area
if it will be modified. In this case, "&b" will take the address
of that temporary area instead of the position in the argument
list, and va_next won't work. That's why HP uses a compiler
built-in.
(Thanks to Cary Coutant, HP for the original and Jeff Law
<law@snake.cs.utah.edu> for the followup)
------------------------------
Subject: 8.6 How can I tell if something was built debuggable?
If the output of "/usr/contrib/bin/odump -spaces file.o" shows a space
named $DEBUG$, then it was compiled with -g.
(Thanks to Fran Litterio <franl@centerline.com>)
------------------------------
Subject: 8.7 Is there some kind of problem with using FLT_MIN in ANSI mode?
The C compiler dislikes this construct in ANSI mode:
x = FLT_MIN; /* <---- warning here */
The problem is that the ANSI mode (_PROTOTYPES) version of FLT_MIN/FLT_MAX in
<float.h> end their constants with an F, which seems to upset the compiler.
The workaround ? Temporarily undef _PROTOTYPES around the <float.h> inclusion:
#ifdef _PROTOTYPES
#undef _PROTOTYPES
#include <float.h>
#define _PROTOTYPES
#else
#include <float.h>
#endif
(Thanks to Richard Lloyd of the Liverpool archive.)
------------------------------
Subject: 8.8 What's the deal with _INCLUDE_xxxx_SOURCE?
The ANSI standard clearly states what identifiers it reserves, and says the rest
are available to you, the programmer. Many "important things" like "ulong" are
*not* specified by ANSI, so ANSI header files are not allowed by the standard to
define them. Each standard supported by HP-UX (POSIX1, POSIX2, XPG2, XPG3,
XPG4, AES, etc) has its own set of reserved identifiers and header files, and
the convention is to require "-D_POSIX_SOURCE" (et al) to enabled their
respective namespaces. Since HP could not predict what future standards would
come along and claim more header files and identifiers, it proved much simpler
to make the namespace as restrictive as possible unless "-D_HPUX_SOURCE" is
specified. While this has turned into one the most frequently asked of FAQ's
about HP-UX, at least once you learn this, you don't have to deal with
inconsistencies again. Whereas, had we allowed all non-standard headers to
define all non-standard symbols, you'd find identifiers randomly "disappearing"
from headers over time as they were claimed by various standards.
Also check the man page for "cc -Ae"; it enables the the HPUX_SOURCE namespace.
(Thanks to Marc Sabatella, HP)
------------------------------
Subject: 8.9 How come I need to explicitly specify -I/usr/include?
You have most likely not updated your C compiler correctly. Patches PHSS_3773
(A.09.63), 4061 (A.09.64) and 4151 (A.09.65) REQUIRE that you first install the
C compiler from the April 1994 Application CD-ROM (A.09.61).
(Thanks to Richard Lloyd)
------------------------------
Subject: 8.10 Is there an equivalent for getrusage()?
From the BSD porting tricks document (thanks, Mike):
#ifdef hpux
#include <sys/syscall.h>
#define getrusage(a, b) syscall(SYS_GETRUSAGE, a, b)
#endif /* hpux */
------------------------------
Subject: 9. HARDWARE AND PERIPHERALS
------------------------------
Subject: 9.1 Are alternate keyboards available for HP workstations?
Yes, HP has two keyboards available for their workstations and X Terminals.
A1099B - Workstation style keyboard (Default on workstations.)
A2205A - PC-101 style keyboard (Default on X Terminals.)
The 712 supports any PC-type keyboard and mouse.
------------------------------
Subject: 9.2 How can I play audio CDs on an HP workstation?
A contributed application ("xcd") exists that presents a X-window CD player
front panel. xcd runs on HP-UX 7.0 and 8.0, on Series 300, 400 and 700, with
either SCSI or HP-IB CD-ROM drives. The SCSI drives must be HP-supplied or
Toshiba XM-3201B or XM-3301B. xcd does not yet officially work on HP-UX 9.0,
but I've tried it and it seems to work just fine. Note that xcd plays only
through the CD player's headphone jack and not through the workstation's
speaker.
xcd is available from the InterWorks workstation user group (see above),
on their ftp site, CD-ROM, and via DDS tape.
Note that source is not available.
Additionally, two new programs that provide similar functionality have
recently appeared, called xdp and xmcd. I use xmcd and it's great.
(Thanks to Bob Niland and others)
------------------------------
Subject: 9.3 How can I enable the LAN interface on a 700?
This can be problem when the LAN isn't connected at boot time. To
resolve the problem, use the "reset" command in "landiag".
------------------------------
Subject: 9.4 How can I get an Exabyte to work on an HP?
People have under HP-UX 8.07 used device files with major number 54,
minor numbers 0x201202 and 0x201203 for /dev/rmt/2m and /dev/rmt/2mn,
respectively, for low density. Other people had used 0x201242 and 0x201243.
Note that with HP-UX 9.01, low density means 8200 format in 8500 drives.
Major #54, minor numbers 0x201202 and 0x201203 are low density handles.
With 8200 drives the density does not matter. Software compression
control with 8505 drives will require a patch to HP-UX 9.01.
Caveats: some Exabyte drives will not support a "dump" blocking factor
greater than 64 from the HP. Others are apparently limited in the commands
they will accept (e.g. TTI noted that their 8501 tape drive will not properly
interface with the HP under all conditions; however, the TTI 8510 does
interface correctly). TTI had a firmware problem which should be
corrected in recent 8510s.
Note that 8500 drives act as SCSI-2, while 8200s are SCSI-1. People appear
to have been more successful with getting the 8500s to work with 9.01.
Experience has also shown that you may need PHKL_2898. People have
also reported that you need patch PHKL_2838 for HP_UX 9.x to get
compression to work.
(Thanks to Mike Peterson for much of this.)
------------------------------
Subject: 9.5 Is there a "node ID" on 700s?
Yes. Most licensing systems (FlexLM and NetLS, for example), are driven from
the LLA, available from /etc/lanscan or /usr/etc/netls/ls_targetid. There is
also a CPU ID number that HP uses for /etc/update; it may be a transformation
of the LLA, but this is not guaranteed to remain the case, and may be disturbed
by replacement of the LAN board. Additionally, the LLA can be reset by a
CE using the proper secret magic program.
------------------------------
Subject: 9.6 How can I get a stuck DDS tape out of the drive?
1) Power down your machine (remember shutdown!!! ;-))
2) Open it up (you'll prob. need Torx screwdrivers).
3) on the side of the drive, you should see a small rectangular piece
of plastic. gently pry it off... it should come off quite easily.
4) the aforementioned piece of plastic covers a hole, which houses a
small dial. spinning this dial ejects the tape.
5) replace plastic piece, close machine... and bob's your uncle.
p.s. the dial has very little torque (ie. the tape comes out quite slowly,
but you can see it move. It'll take about 2-3 minutes of spinning before
the tape comes out.
(Thanks to Edlin Seebick.)
------------------------------
Subject: 9.7 How can I use dump with a DDS tape?
dump was written to assume 9-track tapes, so some fudging has
to be done for DDS tapes. The following has the info you need
along with several alternatives for dump parameters.
Approximate capacity of 60m DDS tape = 1.3G bytes
Approximate DDS tape density = (1.3G bytes) / (60 m) = (550K bytes/in)
dump assumes an inter-record gap (IRG) of 0.3 in for density = 6250,
0.7 in otherwise.
dump uses a default blocking factor of 10 for density < 6250,
32 otherwise.
================
density = 550000
blocking factor = 32 (default)
assumed IRG = 0.7 in
Block length = (32K bytes/block) / (550K bytes/in) + (0.7 in) = (0.76 in)
Effective tape length =
(1.3G bytes) / (32K bytes/block) * (0.76 in/block) = (2511 ft)
================
density = 6250
blocking factor = 32 (default)
assumed IRG = 0.3 in
Block length = (32K bytes/block) / (6250 bytes/in) + (0.3 in) = (5.54 in)
Effective tape length =
(1.3G bytes) / (32K bytes/block) * (5.54 in/block) = (18325 ft)
===============
density = 1600
blocking factor = 10 (default)
assumed IRG = 0.7 in
Block length = (10K bytes/block) / (1600 bytes/in) + (0.7 in) = (7.10 in)
Effective tape length =
(1.3G bytes) / (10K bytes/block) * (7.10 in/block) = (75113 ft)
===============
density = 1600
blocking factor = 32
assumed IRG = 0.7 in
Block length = (32K bytes/block) / (1600 bytes/in) + (0.7 in) = (21.18 in)
Effective tape length =
(1.3G bytes) / (32K bytes/block) * (21.18 in/block) = (70022 ft)
(Thanks to Cary Coutant, HP.)
------------------------------
Subject: 9.8 What is the correct major number for DDS drives on 9.x?
For reasons too detailed to go into here, the major number for DDS drives
has changed to 121 (from 54) at 9.01. Note that 54 had partition support,
while 121 does not, but has lun support. This only works for 700s.
------------------------------
Subject: 9.9 How can I set up /dev/audio to point to the external jack on a 700?
Alter the /dev/audio device file as follows:
crw-rw-rw- 1 root sys 57 0x208011 /dev/audio ; external jack
crw-rw-rw- 1 root sys 57 0x208000 /dev/audio ; internal speaker
The commands are:
mknod /dev/audio c 57 0x2080?? <- replace ?? with 00 or 11 as shown above.
(Thanks to Lou Kvitek.)
------------------------------
Subject: 9.10 How can I configure the parallel port handshake on a 700?
Check out the man page for "cent".
------------------------------
Subject: 9.11 What are the specs of the audio hardware on the 700 series?
This is a summary of the audio features supported by the models 715, 725, 735,
and 755 workstations. The 705 and 710 also have audio, but the specs are
not available. The 720, 730, and 750 models DO NOT have audio.
Audio features Programmable sample rates (kHz): 8, 11.025, 16,
22.05,32, 44.1, 48
Programmable output attenuation: 0 to -96 dB in 1.5 dB steps
Programmable input gain: 0 to 22.5 dB in 1.5 dB steps
Input monitoring
Coding formats: 16-bit linear, 8-bit mulaw, or A-law
Audio inputs Line in
(not on all models) Mono microphone with 1.5V phantom power
(Editorial comment - a Sun microphone appears to work just fine.)
Audio outputs Line out
(not on all models) Headphone
Mono speaker jacks
Built-in mono speaker
Audio CODEC Crystal CS4215
Typical specifications measured on a stock 715. Values will differ only
slightly on other models.
Frequency response 25 - 20,000 Hz
Input Sensitivity/Impedance
Line In 2.0 V(pk) / 47 kohms
Microphone 22 mV(pk) / 1 kohm
Output Impedance (nominal)
Line out 619 ohms
Headphone 118 ohms
Speaker (ext) 11 ohms
Max Output Level/Impedance
Line Out 2.8 V (p-p) / 47 kohms
Headphone 2.75 V (p-p) / 50 ohms
Speaker (ext) 5.88 V (p-p) / 48 ohms
Signal to Noise
Line In 61 dB
Line Out 65 dB
Microphone 57 dB
Headphone 61 dB
Speaker (ext) 63 dB
THD (at nominal load)
Line In -75 dB
Line Out -73 dB
Microphone -73 dB
Headphone -70 dB
Speaker (ext) -68 dB
(Thanks to Rocky Craig, HP)
------------------------------
Subject: 9.12 What are the various revisions of PA-RISC?
PA-RISC 1.1 is an extension to the PA-RISC 1.0 architecture, and is
fully backwards-compatible (i.e., *all* PA-RISC 1.0 programs will
execute without change on PA-RISC 1.1 machines). The biggest difference
is that PA-RISC 1.1 added 16 more floating-point registers, the ability
to address each double-precision floating-point register as two
single-precision registers, and a few new floating-point operations, so
the floating-point performance is greatly improved. There were a few
changes on the integer side, but nothing major.
The first machines to be shipped with PA-RISC 1.1 CPUs were the first
Series 700 machines (the "Snakes" series). Shortly after that, however,
the "Nova" series of Series 800 (8x7) machines was introduced using the
same PA-RISC 1.1 CPU. Since then, every new PA-RISC machine that HP has
produced is based on the PA-RISC 1.1 architecture.
Thus, all Series 700 machines are PA-RISC 1.1, and the newer Series 800
machines are PA-RISC 1.1. If you compile a program on a Series 700
machine, the compiler will generate PA-RISC 1.1 code by default, but if
you compile a program on a Series 800 machine (even a newer 1.1
machine), the compiler will generate PA-RISC 1.0 code to ensure that the
program will run within the entire 800 family.
To force the compiler to generate PA-RISC 1.0 code, you use the +DA 1.0
compiler option. This is all you need to do, as long as you are careful
not to link your code with any libraries that were compiled for PA-RISC
1.1. If *any* object module in your program is compiled for PA-RISC
1.1, your entire program will be marked as a PA-RISC 1.1 program. The
"file" command will tell you which architecture is required to execute
your program. Most system archive libraries that HP ships are compiled
for PA-RISC 1.0; an exception is the math library, which is shipped in
both forms (a PA-RISC 1.1 version is in /lib/pa1.1), although the 1.1
version contains a few entry points that are not available in the 1.0
version.
The scheduling option, +DS xxx, does not affect the compatibility of the
object code. It affects only how the optimizer schedules instructions
that have long latencies, so it is usually to your advantage to schedule
the code for the fastest machine currently shipping, even if you are
generating 1.0 code.
When compiling code on one platform for another platform, the thing
you do have to worry about is the operating system release. In general
you can compile a program on a Series 700 machine with +DA 1.0, and it
will run correctly as long as the program will execute on the same or
a later release of the OS as the one on which it was compiled. Thus,
you cannot expect a program compiled on a 700 running 9.0 to run on
an 800 running 8.0.
(Thanks to Cary Coutant, HP)
------------------------------
Subject: 9.13 How do I read an SGI-written tar format DDS tape?
The secret (at least in this case) is to byte-swap the tape before
passing it to tar:
dd if=/dev/rmt/0m conv=swab | tar -xvf -
Byte swapping is believed to only be necessary if the SGI machine that made
the tape is running Irix 4.0 and under, and that if it's running Irix 5.0x
and above, a large (512k) block size is used:
dd if=/dev/rmt/0m ibs=512k obs=10k| tar -xvf -
(thanks to Paul Booth <paul@eye.com>)
------------------------------
Subject: 9.14! Is there a trackball for the 700?
ITAC Systems supports a Mouse-trak trackball for HP-HIL (all 700s but
the 712). The 712, of course, can use any PC-style trackball.
ITAC no longer offers a 'quadrature' model of the track-ball. This wasn't a
direct connection because you had to buy a quadrature-to-HIL convertor which
was several hundred $. They now sell regular serial port track-ball units
which they claim you can configure as the default pointing device in HP-VUE.
The 'quadrature' device will, however, directly connect to Apollo (or HP400's
under Domain/OS) keyboards in place of the mouse.
The 700/RX terminals claim to use standard PS/2 keyboards. One would assume
that this extends to mice and/or mouse emulators.
(thanks to Jeff Dwork, AMD, and Tom Myers, Delco)
------------------------------
Subject: 9.15 Where can I get disktab entries for third party disks?
Generally, the supplier should provide a disktab entry. Andataco does a good
job of this. One place to try:
http://siihp.epfl.ch/HPUX/tools/disktab.html
You can submit new entries via:
http://siihp.epfl.ch/HPUX/tools/add_dtab.html
Additionally, Ion has set up a mail service; to access it, send e-mail to
<mailer@siihp.epfl.ch> and respect the following syntax for the subject
field:
disktab table - returns the available disktab file
disktab how - returns two methods to create a new disktab entry from scratch
Send any comments, remarks, problems AND new tested disktab entries to
<ion.cionca@sic.adm.epfl.ch>
(thanks to Ion Cionca)
------------------------------
Subject: 9.16 Do I need to terminate the internal SCSI on a 700?
According to some people, an unterminated internal SCSI on a 700
will cause interrupts which are ignored but slow down the machine.
Terminate to be safe.
------------------------------
Subject: 10. LOOKING FOR...
------------------------------
Subject: 10.1 Where did xline go at 9.x?
We don't know. The 9.x Motif version of Glance Plus has what xline had
(and more).
------------------------------
Subject: 10.2 How about the VUE 2.01 man page help index?
The man pages will show up in the index if you copy over pre-9.X copies
of the files "/usr/lib/X11/vue/help/C/manpage.cat", and
"/usr/lib/X11/vue/help/C/manpage/*".
(Thanks, Mike Stroyan, HP)
------------------------------
Subject: 10.3 Is there anything remotely like the Apollo DM available?
HP has a product called DMX which is somewhat like the DM. Enabling
Technologies has a product called "ce" which seems to be a more faithful
interpretation. Demo copies are available from
ftp://ftp.std.com/ftp/vendors/ETG.
------------------------------
Subject: 10.4! Where can I get SLIP for HP-UX?
On HP 9000 systems (both workstations and servers) SLIP is called ppl
and is a part of the LAN/9000 Link product.
(Thanks to Mike Taylor and Alec Henderson, HP)
------------------------------
Subject: 10.5 Where can I get pcnfsd on HP-UX?
It's part of the standard NFS distribution.
------------------------------
Subject: 10.6 Where can I get ppp for HP-UX?
Morningstar has a commercial implementation available. See
ftp://ftp.morningstar.com for more details.
(thanks to Cricket Liu, <cricket@nsr.hp.com>)
------------------------------
Subject: 10.7! Where can I get STREAMS for HP-UX?
STREAMS/UX is currently a separate product that can be purchased for use
with HP-UX 9.x. STREAMS/UX is based on the OSF/1 STREAMS code (which
in turn is based on STREAMS code from Mentat). You can obtain a
STREAMS/UX datasheet from the HP FIRST fax-back service: 800-333-1917
or 208-344-4809, document 31502. HP currently plans to bundle it
with 10.x.
(thanks to Alec Henderson, HP)
------------------------------
Subject: 10.8 What about POSIX threads?
POSIX user-space threads are currently available as part of the DCE
product, which includes thread-safe C libraries.
------------------------------
Subject: 10.9+ Where can I get Interviews for HP-UX?
HP has a product called Interviews Plus. The product number is B2625A for
Series 800 and B2626A for Series 700 systems.
(Thanks to Rob Slotemaker, HP).
------------------------------
Subject: 10.10+ Where can I get POP for HP-UX?
pop3d is available from the Interworks archive site listed in 3.12.
------------------------------
Subject: 10.11+ Where can I get sudo for HP-UX?
CU sudo 1.3 and higher supports hpux. Your best bet is
to grab pub/sysadmin/utilities/cu-sudo.v1.3.1-beta9.tar.Z from
ftp.cs.colorado.edu.
(Thanks to Todd Miller, <millert@cs.Colorado.EDU>)
------------------------------
--
Greg Cagle |
Mentor Graphics Corporation | "Rosalita, jump a little higher..."
greg_cagle@mentorg.com |
(503)685-1570 |